Beiträge von Azmodan

i got the part and successfully replaced it. the pistol now works ok.

however, another issue came up: trigger weight.

after i got the pistol in february, i tested the trigger weight with a homemade 500g weight and it was ok.

after some time i tested it again and it was a little off. i screwed in screw 3 a little bit and it was ok.

now i tested it and it was off again. i had to screw in quite a bit to get it not to fire at 500g. second stage now it a bit heavy.

is this normal? or i have (another) problem with the pistol?

i have the exploded drawing... but it;s minimal information. there are some pins that look very hard to pop out.

i was hoping someone had this problem before and made some pictures/video of how to disassemble that part.

ah. i;m sure in it's life it shot a lot more. it;s 25 years old.

i was saying that I shot ~2000 shots since i got it from egun.de

after ~2000 shots, piece 1840.139.1 broke.

is this common? i have not seen anyone with this problem

i ordered a replacement. how to replace the piece?

Thank you.

just one question/problem: applying the paste like than will make the palm shelf not movable up and down. is it ok? when it's hot, the hand becomes bigger and when it's cold it becomes smaller. don't you need to adjust the palm shelf in that case?

Zitat von no.limits

Hi Azmodan,

from post 251 explains the procedure.

Speak English.

This is probably not working with google translater.

regards Bernd

yes. you are right. the hand does move a bit forward and backward. i;ve read post 222 but i;m not clear where i should put material.

i;ve tried with kid playdoh to test the feeling but it was not ok

Zitat von Bastian

Hello Azmodan,

don`t be mad at me, but i can't imagine that your grip is working well. Indeed you have fixed your "finger position", but the position of your hand is not fixed! Please, take a look at # 222. You will find a very good tutorial, which explains the best way to model grips. If you have questions, feel free to ask.

modified the FWB100 grip with morini compound. video on the process: https://www.youtube.com/watch?v=tJfC5A3Kt1I

manually save the interesting auctions and than check back after they completed

Average prices (plus min, max and count) of used airpistols sold on eGun.de from february until june

made a short instruction video on how to replace the valve O-ring: https://youtu.be/7Z_U8ognTKU

presentation video for the fwb100: https://youtu.be/vFPi4_v8YTw

it was just the valve seal (1750.214.1 and 1750.215.1). replaced just those and it works ok now

I'm having problems with the FWB grip too.

The problem with adding putty is that the grip is made out of 2 parts. Putting putty on the finger groves will glue the 2 grip panels together, making it impossible to take the grip off the gun

i have never seen a picture of a FWB with "worked" grips. all that i could find are factory condition....

Hi

i have problems with my newly bought FWB100 (from egun.de).

When i got it everything was OK. After 100 pellets (and some dry-firing) it started to not eject all the compressed air (when opening the pump lever air would escape, or if i cocked the gun manually, a second burst of air would come out without pumping) and the pellet visibly slower.

I read that the number 9 screw controlled the striker spring, so i screwed it in a bit. That solved the problem for a few shots, rather than the problem reappeared.

Now i got to the end of the screw length and the gun still manifests the same problem.

If i leave it alone for some time (~ 10 minutes) i can get a few shots and reappears.

what could be the problem? the striker spring? the valve? the seals?

Thank you